Common faults and maintenance methods in industrial equipment

Category： Industry News

Time：2024-05-07

Industrial equipment often has various faults in the production process, which will affect the production efficiency and product quality. Therefore, it is very important to discover and solve faults in time. This paper will introduce the common faults and maintenance methods of industrial equipment.

1. Electrical failure

Performance of electrical failure: equipment can not start, electrical components heating, electrical components damage, etc.

Maintenance method: First check whether the power supply is normal, and then check whether the electrical components are normal, such as switches, wiring terminals, etc. If electrical components are found to be damaged, replace them immediately.

Second, mechanical failure

The performance of mechanical failure: the operation of the equipment is unstable, the noise is too large, the equipment can not work normally.

Maintenance method: First check whether the transmission parts of the equipment are normal, such as belts, chains, etc. If the transmission parts are found to be damaged, replace them immediately. Secondly, check whether the bearing of the equipment is normal, and if necessary, it should be lubricated or replaced.

Three, hydraulic failure

Performance of hydraulic failure: equipment can not work normally, oil temperature is too high, hydraulic pump sound is too large.

Maintenance method: First check whether the hydraulic oil is normal, if necessary, it should be replaced. Then check whether the hydraulic pump is normal, if necessary, should be replaced. If there is oil leakage in the hydraulic system, it should be checked and repaired in time.

4. Control system failure

The performance of the control system failure: the equipment cannot work properly, the control system failure code, etc.

Maintenance method: First check whether the power supply of the control system is normal, and then check whether the program of the control system is normal. If a program error or controller fault is found, replace it in time.

In short, it is very important to find and solve the faults in industrial equipment in time. During the maintenance process, pay attention to safety and strictly follow the equipment maintenance manual.

Keywords：

RELATED INFORMATION

Jie Neng News

Industry News

Prev： How to dry stevia? Jieneng new era pulsating drying equipment operation flow

Next： Detailed analysis of electricity consumption of chili dryer

Fast Quotation

Price
%{tishi_zhanwei}%